Field Technician, Sheridan Midstream

Phillips 66•Sheridan, WY

3d•Onsite

About The Position

As a Field Technician you will be responsible for working independently and with other personnel to maintain and operate equipment and processes in Midstream business unit. Some of the processes involved use hazardous and volatile materials under high temperature and pressure. Typical working conditions include outside weather and elements, blowing air, heat, noise, vibration and occasionally working from heights and confined spaces. Operators must follow safe work practices including the wearing of Personal Protective Equipment (PPE). This position will work out of the Phillips 66 Midstream office in Sheridan, WY. This position requires the successful completion of an online assessment. If you meet the required qualifications of the position, a link to complete the assessment will be emailed to you immediately after your completed application is received. Please check your spam folder if you do not see the email. The assessment must be completed within 7 days of your application date OR prior to the job posting expiration date, whichever is earlier. The job posting expiration date is listed at the bottom of this job posting. Your assessment results will be valid for one year

Requirements

Legally authorized to work in the job posting country
High School Diploma/GED equivalent
Valid driver's license
Willing and able to perform and comply with following, with or without reasonable accommodation:
To climb up to 20 feet using both inclined and vertical ladders
To lift up to 69 pounds
To push and pull forces up to 100 pounds
To operate a forklift
To respond to emergency calls as needed
To remain on call as needed
To work overtime on an as-needed basis
To work in enclosed spaces, such as tanks and silos
To work with chemicals and bases
To wear personal protective equipment (such as fire retardant clothing, steel-toe shoes, ear and eye protection)
To maintain your face so that a respirator / face mask can seal properly (clean shaven)
To perform firefighting duties (using a fire extinguisher)
To work outside in harsh weather conditions
To work with hydrocarbons

Nice To Haves

Associate’s Degree or higher in Electrical Maintenance, Instrumentation or Industrial Electronics or Journeyman license in an electrical, mechanical, or instrumentation field
4 or more years of experience in the oil and gas industry or military
Working knowledge of pipelines
Mechanical and rotating equipment experience
4 or more years of experience with the following:
Allen-Bradley PLC's
Rosemount Transmitters
OMNI flow computer

Responsibilities

Understand the methods of measurements used for custody transfer
Understand most common forms of measurement including the use of positive displacement meters, mass flow meters, turbine meters, and solids handling measurement
Interface with other internal, external and third-party industry measurement related contacts/resources
Work closely with the Loss Control group on issues that relate to measurement
Perform monthly Pipeline gain/loss analysis
Investigate instances of mismeasurement, computing adjustments and negotiate with other companies when necessary to settle difference in adjusted volumes
Provide input/suggestions into development of Phillips 66 Pipeline measurement standards to promote measurement uniformity and compliance with API measurement standards while keeping abreast of measurement trends and technology advances
Review/audit metering systems to ensure end-to-end integrity and accuracy
Review proving factors, flow computer and LC computations, data transmission, and SCADA computations
Schedule calibrations, inspections, audits, and other related activities with facility supervisors and other third parties
Participate as witness to all company and third-party prover water draws
Perform troubleshooting, repairs, inspections, calibrations and replacement of equipment as necessary:
Inspect and Test Pressure Regulating Systems
Install Threaded Pipe and Fittings o Install process Tubing and Fittings
Inspect and repair electrical and hydraulic valve actuators
Perform routine pipeline maintenance:
Inspect and Evaluate Buried Pipe
Launch and Receive Pigging Tools
Monitor Installation of Pipeline Crossings
Conduct emergency one-calls, line locates, and onsite excavation third party
Maintain Pipeline Right of Way
Maintain Pipeline Markers and Signs
Inspect, Operate and Maintain Valves
Ensure accurate and timely completion of paperwork
Respond promptly and effectively to customer needs
Respond to emergencies and assist in maintaining emergency equipment
Complete mandated safety and regulatory training (Computer Based Training)
Maintain effective and professional relationships with pipeline customers and vendors
Perform environmental, company and regulatory checks as necessary

Benefits

Annual Variable Cash Incentive Program (VCIP) bonus
8% 401k company match
Cash Balance Account pension
Medical, Dental, and Vision benefits with an annual company contribution to a Health Savings Account for employees on HDHP
Total well-being programs and incentives, including Employee Assistance Plan, well-being reimbursement, and backup family care services

Stand Out From the Crowd

Upload your resume and get instant feedback on how well it matches this job.

Upload and Match Resume